I. Product introduction
AS-CM20 catalyst is a polymetallic oxide system, which is mainly used in gas mixture that contains CO and O2 (not containing olefin) to remove CO and O2. When the chemical ratio of O2 is higher than that of CO, then it is used to remove CO. When the chemical ratio of CO is higher than that of O2, then it is used to remove O2.
The catalyst is featured in high catalytic activity, high purification degree and a wide range of working temperature, industrially energy saving and continuously high activity. It is applicable to all seasons, safe to use and easy to operate.
II. Typical service condition
1. Reactor height-diameter ratio: 3～5 5.Raw Gas Content: CO/O2≤4%
2. Operating temperature:60～80℃ 6. Bulk Density: 1.1±0.1 Kg/L
3. Operating velocity: ≤4000hr-1 7. Mechanical strength: 60N／pcs
4. Service life: 3 Years 8. Remnant CO /O2 after purification: ≤1ppm
III. Operating method
Fill in the deoxidizer in the reactor with 1500～3000hr-1 velocity, heat the reactor so that the temperature of the deoxidizer can evenly rise to 60～80℃. After constant temperature, fill in the gas to be purified and the catalyst starts to remove CO (deoxidization).
